Scheppach bs 400 User Manual

10 english
• Installations, repairsand maintenance withregards to
the electrical instalIation should only be carried out by
specialists.
•Themachineisonlyintendedforindustrialuse.
•Wearprotectiongloveswhenexchangingthesawblade.
• Allprotectionandsafetyinstructionsmustbeassembled
imediately after finished repair and maintenance works.
• Alsoupontheslightestpositionmovementseparatethe
machine from the external power supply! Upon return to
service, connect the machine to the power supply
according to the rules!
Intended use
• The machine complies with the valid EG Machines
guideline.
• TheScheppachconstructioncircularsawshouldnotbe
used in closed rooms.
• Onlyworkwithearprotection.
• The machine is builtaccording tothe electroniclevel
and the safety-related rules. Nevertheless, danger for
life and limb of the user or a third party, respectively
damage to the machine and other intrinsic values can
arise during its use.
• Usethemachineonlyintechnicalimpeccablecondition
as well as according to its intended use, and in a safety
and danger conscious manner with observance of the
operational constructions! Immediately eliminate, or
have eliminated, in particular those disorders that can
harm the safety!
• The Scheppach construction circular saw has been
constructed exclusively with tools supplied by Scheppach,
according to EN 847-1 and accessories constructed for
the sawing of wood. Please note that while sawing all
workpieces should be held and led safely.
• Themaximumworkpiecethicknessis106mmforthe
bs400 and 156 mm for the bs500.
• Everyusesurpassingthiscountsasnonintendeduse.In
this case the manufacturer is not liable for damages
caused; therefore the user only bears the
consequences.
• The safety, work and maintenance regulations of the
producer as well as the measurments mentioned in the
“Technical information“ must be adhered to.
• Attentionmustbepaidtotheapplicablepreventionof
accidents rules and to the other, generally accepted
safety-related rules.
• TheScheppachconstructioncircularsawshouldonlybe
used, maintained or repaired by people who are familiar
with it and informed about the risks. Arbitrary changes
to the machine exclude liability of the manufacturar.
• TheScheppachconstructioncircularsawshouldonlybe
used with original accessories, original extension tools
and original saw blades of the manufacturer.
•Accordingtothecurrentlyvalidregulationstheuseof
this machine is not allowed in closed rooms. The
machine should only be used outside or in sufficiently
ventilated rooms.
Other risks
The machine is built according to the up to date technical
level and the accepted safety-related rules. However,
some remaining risks might appear during work.
• Riskofinjurytongersandhandsbytherotatingsaw
blade in case of incorrect usage of the workpiece.
• Injuriesbecauseoftheworkpiecebeingslungawaydue
to incorrect holding or usage, such as working without
end stop.
• Risktohealthbecauseofwooddustorwoodsplinters.
Wear personal protection gear such as eye protection
and dusk mask without fail.
• Injuriescausedbyadefectsaw blade.Checkthesaw
blade regularly for its integrity.
• Electricity danger, in case electrical connections that
are not according to the rules are used.
• Furthermore, despite of all precautions unapparent
remaining risk can exist.
• Remaining risks can be minimized, when the “Safety
information” and the ”Intended use” as well as the
operational instructions are both respected.
•Deactivate the machine and pull out the power plugs
when you want to clean the machine.
•Keep the electrical connections always oil and grease
free.
•Themachinehasaworkingareathatisinfrontofthe
machine.
bs 400 bs 500
Scope of delivery
Construction circular
saw
Construction circular
saw
Longitudinal end stop Longitudinal end stop
Crosscut gauge Crosscut gauge
Saw blade Saw blade
Spline end Spline end
Blade wrench Blade wrench
Adherence arbor Adherence arbor
Assembly accessories Assembly accessories
Manual Manual
Technical information
Measurements
LxWxH mm
1725x706x1082 1725x706x1082
Table size mm
675 x 1000 675 x 1000
Saw blade ø
mm
400 500
Cut height mm.
106 156
Rotationnº
1/min.
2800 2840
Weight kg
98
98

Scheppach bs 400 Specifications

General

Brand	Scheppach
Model	bs 400
Category	Saw
Language	English