To Next PageTo Next PageTo Previous PageTo Previous Page
Why does my Scheppach Power Tool drill bit burn?
Drill bit burning in your Scheppach Power Tool can occur due to several reasons: * The speed may be incorrect, so you should change the speed. * Chips might not be coming out of the hole. Retract the drill bit frequently to remove chips. * The drill bit may be dull, so resharpen the drill bit. * The feed may be too slow, so increase the feed rate.
General| Drilling | Yes |
|---|---|
| Screwdriving | - |
| Product color | Blue, Grey |
| Input power | 500 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Idle speed (max) | - RPM |
| Chuck capacity (max) | 16 mm |
| Drilling diameter in steel (max) | - mm |
| Product type | Bench drill press |
| Housing material | Steel |
| Drill table size (WxD) | 160 x 160 mm |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 380 mm |
| Height | 250 mm |
| Weight | 15420 g |
General safety guidelines for using electric tools.
Proper techniques for operating the electric tool safely.
Warning about laser radiation and precautions.
Guidelines for maintaining a safe working environment.
Essential safety measures when using the laser.
Precautions related to electrical hazards and connections.
Specific safety precautions for drill operation.
Warning about electromagnetic fields and medical implants.
Personal safety measures and attentiveness during operation.
Steps for assembling the column and base.
Instructions for mounting the drilling table onto the pillar.
Guide to selecting spindle speeds and adjusting belts.
Risks and checks for damaged power cables.
