www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
28
|
GB
17. Troubleshooting
Problem Possible Cause Remedy
Motor stops starting
Overload protection device
disengaged to protect the log splitter
from being damaged
Fails to split logs
loading
the machine
Sharpen cutting edge
Oil leaks
taking unfamiliar noise or
vibrating a lot
ram or from other points
operating
operating the log splitter
Bleed screw is not tightened before
moving the log splitter
Tighten bleed screw up before moving the log
splitter
Oil drain screw loose
Old devices must not be disposed of with house-
hold waste!
not be disposed of together with domestic
waste in compliance with the Directive
posed of at a designated collection point. This can
and electronic equipment. Improper handling of
for the environment and human health due to poten
in electrical and electronic equipment.
You can obtain information on collection points for
for the disposal of waste electrical and electronic
To Next Page
Loading...
Need help?
General
