www.scheppach.com
20
|
GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1. Handle
2. Mains cable
3. Float switch
4. Suction strainer, ne
5. Suction strainer, coarse
6. Pump connection bend
7. Hose connection port
8. Pressure connection
9. Floor plate
10. Float switch grid
3. Scope of delivery
• Operating manual
• Combination submersible pump
• Suction strainer, ne
• Suction strainer, coarse
• Pump connection bend
• Hose connection port
4. Proper use
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/oper-
ator, not the manufacturer, is responsible for damages
or injuries of any type resulting from this. An element of
the intended use is also the observance of the safety
instructions, as well as the assembly instructions and
operating information in the operating manual. Persons
who operate and maintain the machine must be familiar
with it and must be informed about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed. Other general occupa-
tional health and safety-related rules and regulations
must be observed. The liability of the manufacturer and
resulting damages are excluded in the event of modi-
cations of the machine.
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating instructions include important instruc-
tions for the safe, proper and economic operation of
the machine, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the machine.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the machine in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work. The machine may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards. The
required minimum age must be observed.
To Next Page
Loading...
Need help?
General
