English
33
NOTE: During Scan, tap the Channel “B” button to Fast Save the current FM station
as the current Preset.
AUTOMATIC RADIO TUNING
This feature makes nding new stations fast and easy by automatically creating a
temporary list of 6 “on-the-go” radio stations.
1. Turn on the Radio.
2. Press and hold the Volume Down button for 6 seconds.
3. Your SRC-System™ will search upwards (higher frequency) from the
current station and store the next 6 FM stations it discovers as “on the
go” stations.
4. If desired, repeat from Step 2 to store the next 6 FM stations as “on the
go” stations.
NOTE: These 6 temporary “on the go” stations cannot be saved and do not replace
the FM Presets you may have saved.
Turning o your SRC-System™ will clear the Automatic Radio Tuning stations and
restore the FM Presets.
8. USING THE INTERCOM
8.1 INTRODUCTION
Your SRC-System™ allows you to connect to other bikers using SRC headsets
within a range of up to 700 meters / 2,300 ft. (subject to terrain). To set up one
or two Intercom Bluetooth® connections, you must rst pair your SRC-System™
headset with the other headsets.
Pairing is a one time process. Once completed, the headsets will remain paired
and automatically recognize each other whenever they are within range.
Your headset has two Intercom channels available for headset-to-headset
connections. Therefore, your SRC-System™ can communicate simultaneously in
conference mode with up to two other SRC headsets.
8.2 INTERCOM COMPATIBILITY
You can use your SRC-System™ headset for Intercom communication with any
other SRC-System™ headset and with cardo scala rider headsets. For further
details visit www.cardosystems.com/SRC.
8.3 BEFORE STARTING THE INTERCOM
Your SRC-System™ headset has two buttons designated for quick connection to
two other headsets. These other headsets are referred to as CHANNEL “A” and
CHANNEL “B”.
Channel “A“
Button
Channel “B“
Button
Before you can begin using the intercom for Bike-to-Bike communication with
one or two other headsets, all units must rst be paired.