30
AK - 44
CHASSIS
16. LANGUAGES
GROUP 1 GROUP 2
German English
Italian Polish
Dutch Slovak
French Hungarian
Spanish Russian
Portuguese Bulgarian
Swedish Czech
Norwegian Rumanian
Finnish Croatian
Dannish
English
Greek
Turkish
17. HOTEL MODE FUNCTIONS
The following procedure details how to set up the Hotel Mode Functions.
1. Description
The Hotel Mode deactivates Install and Program Features from the Main Features Menu. By other hand it can be
reduced the Maximum Volume Level.
2. Before Start
It is necessary to program the channel setting (tuning and sorting) because after that this features will be
deactivated.
3. Procedure
3.1 Enter the Service Mode. See Page 23.
3.2 Access to OP4 Register by CURSOR UP / DOWN.
3.3 Press 4 button on the remote control in order to activate the Hotel Mode.
3.4 Exit the Service Mode by the Menu button (30).
3.5 Enter again the Service Mode but with a new sequence of numbers: 1, 3, 2 and 5 consecutively. The following
On Screen Display appears (figure on the left):
3.6 Activate the Hotel Mode as the above righ figure.
3.7 Proceed with the required Volume Limit.
3.8 Exit the Service Mode.
To Next Page
Loading...
Need help?
General
