7 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed..
2]
[] Channel Setting
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel,
1 Press MENU to access the MAIN MENU screen..
2 Press CH ,&/V to move the "0" mark to "SET UP".
MENU
P,_ENU
BE}SLEEPTIMER
{];_VtDEOADJUST
EE_UDI0 SELECT
_DIG_TAL AUDIO
_CLOBED CAPTION
i_5]PARENTCONTROL
_ENERGY SAVE
e_SET UP
(MAIN MENU screen)
3 Press VOL +/- to access the SET UP screen.
4 Press CH ,&i_ to move the "O" mark to "CH SETTING".
[_S_T UP
BLUE SCREEN
LANGUAGE
OCN SETTING
AUTO IflPUT
_CR_EN FO_AT
.(SET UP screen)
5 Press VOL +I- to access the CH SETTING screen.
o If the viewing channel is an analog channel, Antenna
Setup Digital cannot be selected,.
. During Cable mode, Digital Channel Search, and
Antenna Setup Digital cannot be selected,,
(H _ETT_NG
OEZ _ETUP
AI_I ANALOG (ABLE
ANALOG CH SEARCH
DIG_TAL C_ SEARCH
CH MBMOR_
ANTENNA SETUP-DIGITAL
(CH SETTING screen)
6
Press CH AtV to move the "0" mark to "AIR/ANALOG CABLE",
then press VOL +/- to access the AIR/CABLE screen.
CF_5ETTIt_O
EZ SETUP
OAIRIANALOG CABL_
ANALOG CN _EARCN
DIGITAL 04 SEAnEH
(H t,E_0RY
ANTENNA SETOP-DIGHAL
7
Press CH AI_' to move the "0" mark to the desired mode.
[_[_ = ICABLESTDI=I CABLEHRCl= [CABLEIRCI_---I
A IRt ANALOG CABLE
AIR
CABLE STD
OCABLE HRC
tCABLE IRC
(AIR/CABLE screen)
8 Press MENU to exiL
. Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13
UHF: 14 through 69.
MENU
©
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
33
To Next Page
Loading...
Need help?
General
