OOIOOLBY/°
DIGITAL
Dolby and the double-D symbol are registered trademarks of Doiby Laboratories
Oo :::::::1
:0:J
Infrared Remote Control
Size AA
Dry Batteries
Location
o For normal operation, your TV should be located in an area of the room where cool adequate
ventilation is provided Do not place the back of the television set in a place where free airflow will
be restricted°
o Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
- If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
o Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn
off the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first
Inserting the batteries
Pull up
Battery
Cover
o With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two
batteries (size "AA"). Be sure to match the battery O/O terminals with the O/O marks inside the
compartment..
To Next Page
Loading...
Need help?
General
