26
Unit price and associated department assignment
Unit price (max. six digits)
You will usually have unit prices programmed for individual PLUs as PLU preset unit prices. If you program
unit price “0” for a PLU, you can enter only the selling quantity of the PLU, i.e. the PLU can be used only
as a counter.
Associated department
When a PLU is associated with a department, the following functions of the PLU depend on the
programming for the corresponding department.
• Tax status, entry digit limit (only for the subdepartment), single item cash sale, and sign
*1: 1 through 200 (ER-A160) or 1 through 400 (ER-A180)
*2: To shift the department key, press the department shift key at this point. (ER-A180 only)
PLU/subdepartment mode
If the PLU mode (i.e. automatic preset unit price entry) is selected, individual PLU entries can be made by
entering the assigned code and depressing the
Ö
key. If the subdepartment mode is selected, the following
key operations must be performed: Enter the price, press the
å
key, enter the PLU code, and press the
Ö
key.
*1: 1 through 200 (ER-A160) or
1 through 400 (ER-A180)
*2: 0 for subdepartment mode or 1 for
PLU mode
To Next Page
Loading...
Need help?
General
