Sharp LC-26AF3 M/H/X User Manual

5
LC-26AF3 M/H/X
LC-32AF3 M/H/X
LC-37AF3 M/H/X
Operation Manual
TV (Front)
POWER indicator
OPC sensor
POWER (On/Off) button
TV/VIDEO button
Volume up (+)/down (–) buttons
Channel up (ù )/down ( Ù

) buttons
Remote control sensor
*OPC: Optical Picture Control
SLEEP timer indicator
OPC indicator*
* Press RESET if the TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
•“AV MODE” resets to “USER”.
• TV channel resets to channel 1.
• Audio setting initialises.
• “Surround” resets to “Off”.
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
•Pressing RESET will not work if the TV is in standby mode (indicator lights red).
•Pressing RESET will not delete channel preset and password. See page for resetting the password. See page
to the factory preset values in case you forget your password.
• Image position is initialised.
• Still image mode deactivates.
•Teletext mode resets to normal.
• “Audio Only” setting resets to “Off”.
TV (Rear)
RESET*
INPUT 2 terminals
Antenna input terminal
SYSTEM RESET**
INPUT 3 terminals
INPUT 1 terminals
INPUT 4 (HDMI)
terminals
Headphone jack
AV OUTPUT terminals
AC INPUT terminal
(LC-26/32/37 AF3 M/X Only)
for initialising

Sharp LC-26AF3 M/H/X Specifications

General

Brand	Sharp
Model	LC-26AF3 M/H/X
Category	LCD TV
Language	English