Sharp LC-26S7E-BK User Manual

LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
46
CHAPTER 5. MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS
1. MAJOR IC INFORMATIONS
1.1. U4201 (MST9A885GL)
GENERAL DESCRIPTION
The MST9A885GL is a high performance and fully intergrated IC for multi-function LCD monitor/TV with resolution up to SXGA
(1280x1024)/WXGA+(1400x990). It is configured with an integrated triple-ADC/PLL,an integrated DVI/HDCP/HDMI receiver.a multi-standard TV video and
audio decoder,a video de-interlacer,a scalling engine,the MStarACE-3 color engine,an on –screen display controller,an 8-bit MCU and a built –in output
panel interface.By use of external frame buffer,3-D video decoding and processing are fulfilled for high-quality TV applications.To futher reduce system
costs,the MST9A885GL als integrates intelligent power management control capability for green-mode requirements and spread-mode requirements and
spread-spectrum support for EMI management.
FEATURES
Single display LCD TV controller with PC &multimedia display functions
Input supports up to SXGA & 1080P
Panel supports up to SXGA(1280x1024) /WXGA+(1440x900)
TV decoder with 3-D comb filter
Multi-standard TV sound demodulator and decoder
10-bit triple-ADC for TV and RGB/YPbPr
10-bit video data processing
Integrated DVI/HDCP/HDMI compliant receiver
High-quality scaling engine & 3-D video de-interlacer
3-D video noise reduction
MStarACE-3 picture/color processing engine
Embedded On-Screen Display (OSD) control er engine
Built-in MCU supports PWM & GPIO
Built-in dual-link 8-bit LVDS transmitter
5-volt tolerant inputs
Low EMI and power saving features
256-pin LQFP
NTSC/PAL/SECAM Video Decoder
Supports NTSC M, NTSC-J, NTSC-4.43, PAL (B,D,G,H,M,N,I,Nc), and SECAM
Automatic TV standard detection
Motion adaptive 3-D comb filter for NTSC/PAL
8 configurable CVBS & Y/C S-video inputs
Supports Teletext level-1.5, WSS, VPS,Closed-caption, and V-chip
CVBS video output
Video IF for Multi-Standard Analog TV
Digital low IF architecture
Stepped-gain PGA with 26 dB tuning range and 1 dB tuning resolution
Maximum IF analog gain of 37dB in addition to digital gain
Programmable TOP to accommodate different tuner gain to optimize noise and linearity performance
Multi-Standard TV Sound Decoder
Supports BTSC/NICAM/A2/EIA-J demodulation and decoding
FM stereo & SAP demodulation
L/Rx4, mono, and SIF audio inputs
L/Rx3 loudspeaker and line outputs
Supports sub-woofer output
Built-in audio output DAC’s
Audio processing for loudspeaker channel, including volume, balance, mute, tone, EQ,and virtual stereo/surround
Optional advanced surround available (Dolby1, SRS2, BBE3… etc) Note

Sharp LC-26S7E-BK Specifications

General

Game mode	No
Teletext function	Yes
Display diagonal	26 \
Display brightness	450 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Viewing angle, vertical	150 °
Contrast ratio (typical)	800:1
Viewing angle, horizontal	160 °
RS-232 ports	0
Headphone outputs	1
SCART ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	Black
Panel mounting interface	200 x 100 mm
Power consumption (sleep)	0.19 W
Power consumption (standby)	0.21 W
Power consumption (typical)	67.6 W
RMS rated power	10 W
Tuner type	Analog

Weight and Dimensions

Depth (with stand)	239.8 mm
Width (with stand)	657.8 mm
Height (with stand)	491.1 mm
Weight (with stand)	8400 g
Depth (without stand)	91.6 mm
Height (without stand)	448.4 mm