67
5.2 ADC ADJUST & WHITE BALANCE AUTO ADJUST
5.3 PICTURE
Source: Choose source
STANDARD SETTING: normal picture setting
NONLINE CURVE: Advanced properties
W/B Adjust: White Balance parameter setting
Color Setting: Adjust Colors
Luma Setting: Adjust Lumas
Peaking Setting: Adjust peakings
NR Setting: Adjust NR
CTI Setting: Adjust CTI
Gamma: not commonly used, has been set by default.
DLC: not commonly used, has been set by default.
Film Mode:
VIP:
Picture 2 ADC Setting
Picture 3 Picture setting
To Next Page
Loading...
Need help?
General