To Next Page

To Previous Page

E-mailing

Conﬁguring the e‑mail server settings

You can send scanned documents through e-mail after setting up the SMTP server. For more information on

SMTP settings, contact your e‑mail provider.

Using the control panel

1 From the home screen, touch Settings > E‑mail > E‑mail Setup.

2 Conﬁgure the settings.

Using the Embedded Web Server

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > E‑mail.

3 From the E‑mail Setup section, conﬁgure the settings.

4 Click Save.

Sending an e-mail

Using the control panel

1 Load an original document into the ADF tray or on the scanner glass.

2 From the home screen, touch E-mail, and then enter the needed information.

Note: You can also enter the recipient using the address book or shortcut number.

3 If necessary, conﬁgure the output ﬁle type settings.

4 Send the e-mail.

Using the shortcut number

1 From the control panel, press #, and then enter the shortcut number using the keypad.

2 Send the e‑mail.

E-mailing 35

Sharp MX-B467F User Manual

Other manuals for Sharp MX-B467F