Sharp R-3A53 User Manual

R-3A53
R-3A53B
NOTE: “0” means direct cause and part. “A” means indirect cause and part.
CK: CHECK, RE: REPLACE
I--wcI)t-
aa00wn3aw
a
a
0
::
n
W
W
W W 7 LL
:
2 >
$+J
>EZ
C
=L
z
0
i2sl
N
D
:.
iii
I
0
N
PROBLEM
Home fuse blows when power supply
cord is plugged into wall outlet.
Fuse M6.3A blows when power supply
cord is plugged into wall outlet.
00
88 : 88 does not appear in display but
OFF
CONDITION
power supply cord is plugged into wall
00
outlet.
Display does not operate properly when
STOP/CLEAR pad is touched.
Oven lamp does not light at door
opened. (Display appears.)
Oven does not start when START pad
is touched. (Display appears.)
0
0
Oven lamp does not light. (Display
appears.)
Fan motor does not operate. (Display
appears.)
0
Turntable motor assembly does not
operate. (Display apears.)
0
Oven or any electrical parts does not
stop. But cooking time is 0 or
STOP/CLEAR pad is touched.
IIN
30NDITION
Oven seems to be operating but little or
no heat is produced in oven load. (Micro-
000 00 0
wave power level is set at HIGH.)
Oven does not seem to be operating
properly when MEDIUM HIGH, MEDI-
UM, MEDIUM LOW or LOW is set. (Oven
operates properly at HIGH and then the
STOP/CLEAR pad is touched the oven
stops. )
Oven goes into cook cycle but shuts
down before end of cooking cycle.
0
* Oven stops as soon as when the START
pad is touched.
n/\nr\r\r\
8

Sharp R-3A53 Specifications

General

Brand	Sharp
Model	R-3A53
Category	Microwave Oven
Language	English