Power Level Press the MICROWAVE
button
Display
(Percentage)
• The oven has 11 power levels, as shown.
• To change the power level for cooking, press
the MICROWAVE button until the display
indicates the desired level. Enter the time required
• To check the power level during cooking,
press the MICROWAVE button, the current power
level will be displayed for 3 seconds. The oven
will continue to count down although the display
will show the power level.
• If “P0” is selected, the oven will work with the
fan but no power. You can use this level to
remove the odour.
HIGH
x1 P100
x2 P90
MEDIUM HIGH
x3 P80
x4 P70
MEDIUM
x5 P60
x6 P50
MEDIUM LOW
(DEFROST)
x7 P40
x8 P30
LOW
x9 P20
x10 P10
x11 P0
Generally the following recommendations apply:
- (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
- (MEDIUM HIGH) used for longer cooking of
dense foods such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as sponge cakes.
At this reduced setting, the food will cook evenly
without over cooking at the sides.
- (MEDIUM) for dense
foods which require a
long cooking time when cooked conventionally, e.g.
beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
- (MEDIUM LOW) to defrost, select this
power setting, to ensure that the dish defrosts evenly.
This setting is also ideal for simmering rice, pasta,
dumplings and cooking egg custard.
- (LOW) For gentle defrosting, e.g. cream
gateaux or pastry.
Plug in the oven. The LCD screen will display “0:00”, an audible signal will sound once and right indication lights
are highlighted.
To set the clock, see below.
BEFORE OPERATION
SETTING THE CLOCK
MICROWAVE POWER LEVEL
When the microwave oven is electried, the oven will display “0:00”.
1. Press the CLOCK button once. The hour gure on the LCD display “0:00” will ash.
2. Press the or button to adjust the hour gure until the correct hour is displayed. The input time should
be within 0-23 (24 hour clock).
3. Press the CLOCK button, to conrm the hour gure. The minute gure will now ash.
4. Press the or buttons to adjust the minute gure until the correct minute is displayed. The input time
should be within 0-59.
5. Press the “CLOCK” button to conrm the minute gure and nish the clock setting. The “:” will ash.
NOTES:
In the process of clock setting, if the STOP/CLEAR/LOCK button is pressed, or if there is no operation in 1
minute, the oven go back to the former setting.
If the electrical power supply to your microwave oven is interrupted , the display will show “0:00” after the
power is reinstated. The time of day will also be erased.
•
•
P100/ P90
P80/ P70
P60/ P50
P40/ P30
P20/ P10
and then press the START/CONFIRM/+30 SEC
button to start the oven.