Sharp R-7500M User Manual

10
2. Setting multiplication factor for double/triple quantity
* Suppose you want to set the multiplication factor to 2.00 for
double quantity in memory 1.
Procedure
1 Set the oven L (unlocked).
Close the door.
3 Enter memory number.
4 Press the POWER LEVEL pad.
2 Press the SET MEMORY pad.
Then press the DOUBLE QUANTITY pad.
Display
5 Enter desired multiplication.
(Ex : Enter 2, 0, 0 for 2.00.)
6 Press the SET MEMORY pad to
save the memory.
1
2 0 0
NOTES :
1. The multiplication factors can be set from 0.01 to 9.99 for
double quantity and triple quantity.
2. When you want to set the multiplication factor for triple
quantity, press the TRIPLE QUANTITY pad at step 2 after
pressing the SET MEMORY pad.
x 2
MEMORY CHECK
Use this function to check the programming for each memory bank.
1. To check the memory program
* Suppose you want to know the information programmed
into memory.
2 Press the STOP/CLEAR pad for 2seconds.
Then press the 1 pad when you hear a short beep.
(The program of each memory bank will be shown
for 2 seconds in numbering order)
1 Open the door.
for 2 sec.
3 Press the STOP/CLEAR pad twice to exit from the
Memory Check. Then close the door.
x 2
NOTES :
1. To pause, press the STOP/CLEAR pad once. To continue
Memory Check, press the START pad.
2. To check the program of a certain memory bank, enter its
memory number during the pause.
2. To check the multiplication factor
You can check the multiplication factors of the double and triple
quantities for memory cooking.
* Suppose you want to know the multiplication factors of the
double quantity for memory cooking.
Procedure
1 Open the door.
3 Press the STOP/CLEAR pad twice to exit from the
Memory Check. Then close the door.
Display
x 2
2 Press the STOP/CLEAR pad for 2 seconds.
Then press the 2 pad when you hear a short
beep.
(The multiplication factor of each memory
bank will be shown for 2 seconds in
numbering order)
for 2 sec.
2
NOTES :
1. To pause, press the STOP/CLEAR pad. To continue Memory
Check, press the START pad.
2. To check the multiplication factor of a certain memory bank,
enter its memory number during the pause.
3. When you want to know the multiplication factor for triple
quantity, press the 3 pad after pressing the STOP/CLEAR
pad for 2 seconds at step 2.
Procedure Display
1
R-7500M[EN].inddSec3:10 2019/02/0117:23:55

Sharp R-7500M Specifications

Power

AC line voltage	230-240 V
AC power required	2.85 kW
output power	1800 W

Frequency and Sound

microwave frequency	2450 MHz
sound level	less than 70 dB

Capacity

oven capacity	0.7 cu.ft (19 litres)
cooking uniformity	Rotary antenna system

Weight and Dimensions

outside dimensions (single)	420(W) x 337(H) x 480(D) mm
outside dimensions (two ovens stacked)	420(W) x 674(H) x 480(D) mm
cavity dimensions	332(W) x 171.5(H) x 330(D) mm
weight	Approx. 20 kg