Sharp R-7500M User Manual

12
PROGRAM LOCK SETTING
You can limit functions available to prevent misuse.
The oven has 3 kinds of Program Lock Setting;
L : Unlocked
LL1 : Lock Level 1 = Factory Setting
LL2 : Lock Level 2
The factory setting is LL1 (Lock Level 1). Under LL1 and LL2,
cooking will automatically start after the memory number is input.
Under L (Unlocked), cooking will not begin until the START pad
is pressed.
LL1 is suitable when using both memory and manual
cooking. LL2 is suitable when using memory cooking only.
When saving memories, changing oven lamp or audible signal
sound setting, the oven should be set at L (Unlocked).
Operation for each Program Lock Level
OTHER CONVENIENT FEATURES
 : Available   : Not available
Operation L LL1 LL2
Memory Cooking

Memory Check

Manual Cooking

Saving Memories

Oven Lamp Setting

Audible Signal
Sound setting

Counter Check

2 Press the STOP/CLEAR pad
for 2 seconds. Then press the
SET MEMORY pad when you
hear a short beep.
1 Open the door.
for 2 sec.
Procedure Display
* Suppose you want to set the Program Lock Setting LL2
(current setting: LL1)
After 3 sec.
After 3 seconds, the display will automatically change to
“0”.
3 Close the door to exit from the Program Lock Setting
function.
NOTE :
Repeat step 2 to set LL2 → L → LL1→ LL2... in sequence.
R-7500M[EN].inddSec3:12 2019/02/0117:23:57

Sharp R-7500M Specifications

Power

AC line voltage	230-240 V
AC power required	2.85 kW
output power	1800 W

Frequency and Sound

microwave frequency	2450 MHz
sound level	less than 70 dB

Capacity

oven capacity	0.7 cu.ft (19 litres)
cooking uniformity	Rotary antenna system

Weight and Dimensions

outside dimensions (single)	420(W) x 337(H) x 480(D) mm
outside dimensions (two ovens stacked)	420(W) x 674(H) x 480(D) mm
cavity dimensions	332(W) x 171.5(H) x 330(D) mm
weight	Approx. 20 kg