EasyManuals Logo
Home>Sharp>Microwave Oven>R-950A

Sharp R-950A Service Manual

Sharp R-950A
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
R-950A
1
SERVICE MANUAL
CONVECTION
MICROWAVE OVEN
R-950A
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service
engineers with Operation and Service Information.
It is recommended that service engineers carefully study the
entire text of this manual, so they will be qualified to render
satisfactory customer service.
CAUTION
MICROWAVE RADIATION
DO NOT BECOME EXPOSED TO RADIATION FROM THE
MICROWAVE GENERATOR OR OTHER PARTS
CONDUCTING MICROWAVE ENERGY.
Service engineers should not be exposed to the microwave
energy which may radiate from the magnetron or other
microwave generating devices if it is improperly used or
connected. All input and output microwave connections,
waveguides, flanges and gaskets must be secured. Never
operate the device without a microwave energy absorbing
load attached. Never look into an open waveguide or an-
tenna while the device is energized.
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained
service engineers.
All the parts marked "*" on parts list are used at voltages more
than 250V.
Removal of the outer wrap gives access to potentials above
250V.
All the parts marked "" on parts list may cause undue micro-
wave exposure, by themselves, or when they are damaged,
loosened or removed.
SHARP CORPORATION
OSAKA, JAPAN
PRODUCT SPECIFICATIONS
APPEARANCE VIEW
OPERATING SEQUENCE
FUNCTION OF IMPORTANT
COMPONENTS
SERVICING AND
TROUBLESHOOTING CHART
TEST PROCEDURE
TOUCH CONTROL PANEL
ASSEMBLY
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
MICROWAVE MEASUREMENT
WIRING DIAGRAM
PARTS LIST

Other manuals for Sharp R-950A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp R-950A and is the answer not in the manual?

Sharp R-950A Specifications

Power IconPower
ac line voltage220 V
microwave frequency2450 MHz
ac power required (microwave)1.6 kW
ac power required (convection)1.6 kW
ac power required (grill)1.05 kW
ac power required (simul)3.15 kW
Oven Specifications IconOven Specifications
oven capacity41 litre
output power (microwave)900 W
output power (convection heater)1500 W
output power (grill heater)1000 W
Weight and Dimensions IconWeight and Dimensions
width627 mm
height378 mm
depth492 mm
cavity width410 mm
cavity height245 mm
cavity depth410 mm
weight29 kg

Related product manuals