Siemens A50 User Manual

14
8/13/02 k45dm-ger.fm A50 Stingray, en, A31008-H5110-A1-1-7619
Making a phone call
During a call
Call waiting
During a call, you may be advised
that there is another call waiting. You
will hear a special tone during the
call. You have the following options:
Swap
§Swap§ Accept the waiting call
and place the current call
on hold.
To swap between the
two calls, press §Swap§
each time.
Reject
§Reject§ Reject the waiting call.
The caller will hear the
busy tone
or
§Divert§ if this is set, the caller will
be diverted to the mail-
box for example (p. 48).
End current call
S
End the current call.
§Reply§ Accept the new call.
You may need to register for this service
with your service provider and set your
phone accordingly (p. 61).
~
Set Volume
MN
You can adjust the
handset volume with the
arrow keys (only during
the call).
If a car kit is used, its volume setting
does not affect the usual setting on
the phone.
Phone number memo
You can dial a number with the key-
pad during a call. The person on the
other end of the line can hear the
number being entered. It can be
stored in the Phonebook or called
after the current call has ended.

Siemens A50 Specifications

General

Display resolution	101 x 64 pixels
Networking type	GSM
Operating frequency	900, 1800 MHz
Display number of lines	5 lines
Internal memory	0 MB
WAP	1.2.1
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Ringer type	Monophonic
Microphone included	Yes
Form factor	Bar
Phonebook capacity	50 entries
Text prediction system type	T9
Personal info management (PIM)	Alarm clock, Calculator
Talk time (2G)	5 h
Battery capacity	600 mAh
Standby time (2G)	250 h
Product color	Blue

Weight and Dimensions

Depth	23 mm
Width	46 mm
Height	109 mm
Weight	95 g