en Environmental protection and saving energy
48
Environmental protection and saving energy
2 Environmental protec-
tion and saving energy
Environmental protection and saving energy
2.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
2.2 Tips for saving energy
If you follow these instructions, your
appliance will use less power.
Set the interval for automatic switch-
off to the smallest value.
a
If the appliance is not being used,
it will switch itself off earlier.
→"Basic settings", Page59
Do not interrupt the dispensing pro-
cess prematurely.
a
The amount of water or milk that is
heated is used optimally.
Descale the appliance regularly.
a
Limescale deposits increase the
appliance's energy consumption.
Installation and connection
3 Installation and con-
nection
Installation and connection
3.1 Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
→Fig.
1
Fully automatic coffee ma-
chine
Milk container
Milk tube and suction pipe
Adapter for milk containers
1
Instruction manual
Cleaning tablets
1
Descaling tablets
1
Water hardness testing strip
Water filter
1
1
Depending on the appliance spe-
cifications
3.2 Installing and connecting
the appliance
ATTENTION!
Risk of damage to the appliance. If
the appliance is not started up cor-
rectly, it may be damaged.
▶
Use the appliance in frost-free
rooms only.
▶
If the appliance has been transpor-
ted or stored below 0°C, wait
3hours at room temperature be-
fore starting it up.
▶
After plugging in, always wait ap-
prox.5seconds.
1. Remove the protective film.
2. Place the appliance on a level, wa-
ter-resistant surface that is capable
of bearing its weight.
3. Using the mains plug, connect the
appliance to an earthed socket
that has been correctly installed.
To Next Page
Loading...
Need help?
General
