19.04.2000 2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719
– 11 –
English
❏
Using the repertory keys as ”function keys”
Various services/functions on public telephone systems (which may re-
quire a special order/application) can be selected using defined key com-
binations that can be obtained from your operator. The necessary key com-
binations can be saved on repertory keys as normal call numbers and can
be ”dialed“ and deactivated in the usual way.
Note:
If you activate the symbol display and store functions on the 22nd level of
the repertory keys, then you can use the ”function keys“ to link the acti-
vation and deactivation of various services with the appearance and dis-
appearance of certain symbols on the display.
You should therefore remember, when assigning the repertory keys on the
2nd level, that the aactivation and deactivation of the display symbols
i
,
h
,
g
,
and
j
is linked to very specific keys on the second level –
irrespective of what call numbers or functions are set there!
Activating/deactivating the symbol display
Symbol display can be activates or deactivated as required. The factory
setting is for activated display.
If you press
a
and then one of the following repertory keys when symbol
display is active, then the appropriate display symbol will be activated/de-
activated on the display:
Recommended use of symbols and assigned keys:
>
"
Lift the handset,
then start the function.
or
0 = Deactivate symbol display
1 = Activate symbol display.
"<
Press the set key, then replace the handset.
i
Call forwarding immediately
g
Call forwarding on busy
h
Call forwarding on no reply
Call waiting
j
Anonymous call
K
K
K
K
K
K
K
K
K
K
g
i
h
g
i
h
off
off
off
on
off
on
on
on
Displaysymbol
Key
Displaysymbol
Key
K
K
K
K
K
K
j
on
(for 1 call)
To Next Page
Loading...
Need help?
General
