Siemens euroset User Manual

19.04.2000 2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719
– 8 –
English
Security, lock, call duration display
The telephone can be locked to prevent unauthorized use. You must enter
a 4-digit PPersonal IIdentification NNumber (PIN) for this function.
❏
Changing the PIN
❏
Locking/unlocking repertory numbers to prevent changes
❏
Locking/unlocking the telephone
Only the hot key number can be dialed when the telephone is locked (see
„Dialing a hot key number“ auf Seite 5).
Temporarily deactivating the telephone lock (for one call)
> "l
Lift the handset, then start the function.
J
Enter the new four-digit PIN
.
J
Repeat the new PIN.
"<
Press the set key, then replace the handset.
If you forget your PIN you will have to contact your specialist deal-
er.
> "l
Lift the handset, then start the function.
If necessary, press
a
to lock/ unlock a 2nd level
repertory key.
J
Enter the PIN (factory setting: 0000).

or

0 = Repertory keys not locked
1 = Repertory keys locked
"<
Press the set key, then replace the handset.
>"l
Lift the handset, then start the function.

or

0 = unlock; 11 = lock
J
Enter the PIN.
"<
Press the set key, then replace the handset.
If the telephone is locked, the display shows RRRR
>lJ
Lift the handset, press the lock key, enter the PIN.
J
Dial a call number.
The telephone lock is active again when the handset
is replaced
.

Siemens euroset Specifications

General

Caller ID	Yes
Redial	Yes
Mute	Yes
Volume Control	Yes
Ringer Volume	Adjustable
Wall Mountable	Yes
Type	Corded Phone
Power Source	Phone Line