19.04.2000 2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719
– 5 –
English
❏
Storing/ deleting a hot key number
If the telephone is locked (see „Locking/unlocking the telephone“ auf
Seite 8), the hot key number is automatically dialed when any key is
pressed (except
"
,
l
,
d
,
,
).
Dialing call numbers
❏
Dialing call numbers
Any digits following the 20th digit are shifted from right to left on the display.
Dial pauses of 3 seconds can be inserted by pressing
/
(a pause should
not occur as the first element in a call number).
❏
Dialing with the repertory keys
❏
Last number redial (one of the last 5 call numbers)
The last 5 different call numbers dialed are automatically saved (max. 32
digits each).
❏
Dialing a hot key number
Prerequisite: A hot key number has been stored and the telephone is
locked (the display shows
RRRR
)
> "l
Lift the handset, then start the function.
J
Enter the PIN (factory setting: 0000).
The hot key number is displayed.
If no hot key number has been stored, the display will
show
R
.
J
Enter a hot key number (max. 32 digits)
or
/
Delete the hot key number
"<
Press the set key, then replace the handset
>
Lift the handset (or press the loudspk. key
d
).
J
Dial the call number.
>
Lift the handset (or press the loudspk. key
d
).
If necessary, press
a
(for a 2nd level repertory
key).
K
Press the repertory key.
>
Lift the handset (or press the loudspk. key
d
).
/
...
/
Press the redial key repeatedly until the required call
number appears with the place number (1...5 on the
left).
J
Enter the place number (1...5).
The relevant call number is redialed.
>
Lift the handset, then press any key
(except
"
,
l
,
d
,
,
).
Harris
To Next Page
Loading...
Need help?
General
