Name: Siemens IQ500 WG46G2ZEIE
Brand: Siemens
Rating: 4 (1 reviews)

To Next Page

To Previous Page

en Before using for the first time

2. To align the appliance, turn the ap-

pliance feet. Check that the appli-

ance is level using a spirit level.

All appliance feet must stand firmly

on the ground.

3. Use a WAF 17 wrench to tighten

the lock nuts against the housing

until they are hand-tight.

In doing so, hold the foot tight and

do not adjust its height.

Before using for the first time

5 Before using for the

first time

Before using for the first time

Prepare the appliance for use.

5.1 Starting an empty wash-

ing cycle

Your appliance was inspected thor-

oughly before leaving the factory. To

remove any residual water, run the

first wash cycle without any laundry.

1. Turn the programme selector to

Drum Clean.

2. Close the door.

3. Pull out the detergent drawer.

4. Pour approx. 1 litre of tap water

into compartment II.

Questions and Answers:

Need help?

Do you have a question about the Siemens IQ500 WG46G2ZEIE and is the answer not in the manual?

Siemens IQ500 WG46G2ZEIE Specifications

General