Cleaning and servicing en
33
15.2 Changing the basic set-
tings
1. Set the programme selector to po-
sition 1. →Page32
2. Press Spin Speedand, at the
same time, turn the programme
selector to position2.
a The display shows the current
value.
3. Use the programme selector to se-
lect the required basic setting.
→Page32
4. To change the value, press Ready
In.
5. To save the changes, switch off
the appliance.
Cleaning and servicing
16 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Run the Drum Clean programme
without laundry but with washing
powder that contains oxygen
bleach or a a cleaning agent for
caring for the inside of the appli-
ance.
→"Accessories", Page28
16.2 Cleaning the detergent
drawer
1. Pull out the detergent drawer.
2. Press down on the insert and re-
move the detergent drawer.
3. Pull out the insert upwards.
To Next Page
Loading...
Need help?
General
