Display en
21
Display Designation More information
Energy consump-
tion
Energy consumption for the selected pro-
gramme.
¡ : Low energy consumption
¡ : High energy consumption
Water consump-
tion
Water consumption for the selected pro-
gramme.
¡ : Low water consumption
¡ : High water consumption
End signal Basic setting
Button signal Basic setting
Display brightness Basic setting
Reminder to clean
the drum
Flashes: Drum is dirty. Run the Drum
Cleanprogramme for cleaning and caring
for the drum and the outer tub.
→"Cleaning the drum", Page32
Voltage control
system
Flashes: The automatic voltage control
system detects impermissible voltage
drops. This will pause the programme.
Note:The programme will continue when
the voltage is permissible again.
Voltage control
system
Flashes: The programme has been
paused because of impermissible voltage
drops. The voltage is permissible again
and the programme will continue.
Note:The programme duration is exten-
ded.
Foam detection
system
The appliance has detected too much
foam.
Door ¡ Lights up: The door is locked and can-
not be opened.
¡ Flashes: The door is not closed prop-
erly.
¡ Off: The door is unlocked and can be
opened.
Tap ¡ No water pressure.
¡ The water pressure is too low.
E:35 / -10
1
Error Error code, error display, signal.
1
Example
To Next Page
Loading...
Need help?
General
