en Transportation, storage and disposal
44
17.1 Emergency release
Releasing the door
Requirement:The drain pump is
empty. →Page33
1. ATTENTION! Escaping water may
cause material damage.
▶
Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a The door lock is released.
2. Insert the maintenance flap and
lock it into place.
3. Close the maintenance flap.
Transportation, storage and disposal
18 Transportation, stor-
age and disposal
Transportation, storage and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
18.1 Removing the appliance
Note:More detailed instructions for
use can be found on www.siemens-
home.bsh-group.com or by scanning
the QR code on the title page of this
user manual.
1. Turn off the water tap.
2. Empty the water inlet hose.
3. Switch off the appliance.
4. Unplug the appliance's mains plug.
5. Drain the water.
→"Cleaning the drain pump",
Page33
6. Detach the hoses.
18.2 Inserting the transit
bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
1. Use a screwdriver to remove the 4
cover caps.
Keep the cover caps.
2. Install the 4 transit bolts. Refer to
the description Removing the
transit bolts for this and proceed in
reverse order.
18.3 Using the appliance
again
▶
For further information, see
→"Installation and connection",
Page12 and
→"Before using for the first time",
Page19.
To Next Page
Loading...
Need help?
General
