Siemens LDS 6 User Manual

LDS 6
Operating Instructions, 01/2009, A5E00295894-05
83
Technical Data
8
8.1 Central Unit
All critical components are housed in the central unit which can be placed several hundred
meters away from the measurement point.
Table 8- 1 Analytical performance
(The exact performance can be obtained from the individual analyzer data sheet)
Analytical performance
Measuring ranges Internally adjustable
Detection limit
HF
HCl
NH
3
H
2
O (top measuring range)
O
2
CO (one component)
CO
2
(one component)
CO/CO
2
at 25 °C, 1000 hPa, 1 m path length and ambient
air.
Calculation based on VDI 2449 with
measurement on each supplied analysis device
during temperature test (between +5 ... +45 °C)
according to VDI 4203
0.1 ppm
0.6 ppm (0.2 ppm for TÜV/MCerts analyzers)
1 000 ppm
1 000 ppm
1 000 ppm
300 ppm
300 ppm
600 ppm/1.500 ppm
Smallest recommended measuring range
HF
HCl
NH
3
H
2
O (top measuring range)
O
2
CO (one component)
CO
2
(one component)
CO/CO
2
0 ... 5 ppm
0 ... 10 ppm
0 ... 10 ppm
0 ... 5 vol %
0 ... 5 vol. %
0 ... 1.5 vol. %
0 ... 1.5 vol. %
0 ... 3 vol. % / 0 ... 7.5 vol. %
The maximum applicable measuring ranges can be found in the table of standard combinations.
These can only be applied if the individual process conditions allow. We recom mend to contact
our Technical Support for checking the applicability.

Siemens LDS 6 Specifications

General

Brand	Siemens
Model	LDS 6
Category	Measuring Instruments
Language	English