Migration from MC35 to MC35i
PRELIMINARY
Migration from MC35 to MC35i
19 of 30 12.03.03
5 AT commands migration
AT Cellular command structure for MC35i incorporates that of MC35 with the added
improvements and new features.
Available commands for both MC35i and MC35 are listed and classified according to their
implementation within each of the modules. The entire command set of MC35 is supported
by MC35i. Differences in test, query and execution syntax as well as in available parameters
are noted for each command. Commands are classified in three main groups: jointly
supported commands, commands new with respect to MC35 and MC35 commands not
supported by MC35i
5.1 General comments
MC35i feature highlights
The commands below are either newly introduced or improvements:
æ AT+CGREG: GPRS network registration status
GPRS AT commands in accordance with GSM 07.07
Command indicates the registration status of the module during a GPRS session.
æ AT^SMONC: Cell Monitoring
Siemens defined AT commands for enhanced functions
Command was re-introduced in MC35i, based on TC35, not available with MC35.
æ AT^SMONG: GPRS Monitor
Siemens defined AT commands for enhanced functions
Will display GPRS specific cell info either on request or periodically
æ AT^SPBD: Delete the given Phonebook
Siemens defined AT commands for enhanced functions
Deletes entire phonebook contents with a single command.
æ AT^SSMSS: Set Short Message Storage Sequence
Siemens defined AT commands for enhanced functions
Command controls addressing of the logical SMS storage "MT".
To Next Page
Need help?
General
