Siemens RUGGEDCOM RSG2488 User Manual

RUGGEDCOM RUGGEDCOM RSG2488
Installation Guide
Chapter 4
Technical Specifications
PTP Specifications 39
Best results can be achieved with a total gain of 16 dB (includes antenna gain, cable loss, lightning
arrestor loss, line amplifier gain and filter loss) at the antenna input.
Section 4.6
PTP Specifications
IRIG-B PWM Input Specifications
Parameter Specification
Input Voltage TTL-Compatible
Input Impedance > 200 kΩ
IRIG-B PWM Output Specifications
Parameter Specification
Output Current (I
s
) 100 mA
Output Voltage (V
s
) TTL-Compatible
Output Impedance (R
s
) 50 Ω
IRIG-B AM Output Specifications
Parameter Specification
Carrier Frequency 1 kHz
Modulation Depth 3:1±10%
Output Current (I
s
) 24 mA
Output Impedance (R
s
) 10 Ω
Output Voltage (V
s
) 6 V
p-p
Section 4.7
Supported Networking Standards
Parameter 10 Mbps 100 Mbps 1000 Mbps Notes
IEEE 802.1AB Yes Yes Yes Link Layer Discovery Protocol (LLDP)
IEEE 802.1D Yes Yes Yes MAC bridges
IEEE 802.1Q Yes Yes Yes VLAN (Virtual LAN)
IEEE 802.1p Yes Yes Yes Priority levels
IEEE 802.1x Yes Yes Yes Port-based network access control
IEEE 802.3 Yes No No 10Base-T
IEEE 802.3u No Yes No 100Base-TX/100Base-FX

Siemens RUGGEDCOM RSG2488 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RSG2488
Category	Switch
Language	English