RUGGEDCOM RUGGEDCOM RSG2488
Installation Guide
Chapter 6
Certification
Agency Approvals 45
Certification
The RUGGEDCOM RSG2488 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
• Section 6.1, “Agency Approvals”
• Section 6.2, “FCC Compliance”
• Section 6.3, “Industry Canada Compliance”
• Section 6.4, “EMI and Environmental Type Tests”
Section 6.1
Agency Approvals
The RSG2488 has received approval from various agencies.
Agency Standards Comments
FCC FCC Part 15 Class A for USA
CE EN 55022, EN 61000-3-2, EN
61000-3-3, EN 61000-6-2, EN
60950-1, EN 60825-1, EN 50581
EU directives include 2004/108/EC
(EMC Directive), 2011/65/EU (ROHS)
and 2006/95/EC (Low Voltage Directive)
TUV IEC 60950-1, EN 60950-1, CSA/UL 60950-1 International Safety Compliance
Industry Canada (IC) ICES-003 Class A for Canada
FDA/CDRH 21 CFR Chapter I, Sub-chapter J Compliant
Section 6.2
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3
Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
To Next Page
Loading...
Need help?
General