Commissioning the device
4.3 Parameter assignment for Comfort Panel
Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB
91
Regional and language settings
The date, time and decimal points are displayed differently in different countries. You can
adapt the display format to meet the requirements of various regions. The country-specific
settings apply to the current project. If the project language is changed, the country-specific
settings are also changed.
The Control Panel is open.
1. Open the "Regional and Language Settings" dialog using the "Regional Settings" icon.
2. Select the required region in the selection box ①.
3. Navigate to the "Number", "Currency", "Time" and "Date" tabs one after the other.
4. Set the required regional settings in the selection field of these tabs.
5. Confirm your entries.
The dialog closes.
The country-specific specifications for the HMI device are now set. "Setting the date and time
(Page 91)" describes how to activate daylight saving time.
Setting the date and time
You can use this function to set the date and time. The HMI device has an internal buffered
clock.
The Control Panel is open.
To Next Page
Loading...
Need help?
General
