Siemens SIMATIC IOT2020 User Manual

SIMATIC IOT2020, SIMATIC IOT2040
Operating Instructions, 10/2016, A5E37656492-AB
3
Preface
These operating instructions contain all the information you need for commissioning and
operation of a device in the SIMATIC IOT2000 family.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge requirements
Knowledge of personal computers, operating systems and programming is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of validity of this document
These operating instructions apply to the following devices of the device family
SIMATIC IOT2000:
● SIMATIC IOT2020
● SIMATIC IOT2040
Scope of this documentation
The device documentation comprises:
● Product information, e.g. "Important notes on your device"
● Quick Install Guide SIMATIC IOT2000
● SIMATIC IOT2000 operating instructions in German and English
Conventions
The following generic terms are used in this documentation:
Generic term
Specific name
Device
SIMATIC IOT2020, SIMATIC IOT2040
Arduino shield
ARDUINO UNO (Rev3)
The term "device" is sometimes used to refer to the SIMATIC IOT2020 and
SIMATIC IOT2040.

Siemens SIMATIC IOT2020 Specifications

General

Brand	Siemens
Model	SIMATIC IOT2020
Category	Control Unit
Language	English