SIMATIC IOT2020, SIMATIC IOT2040
Operating Instructions, 10/2016, A5E37656492-AB
39
Certificates and approvals
The approvals are voided if certain modifications are made
The device approvals are voided if the following modifications are made:
• An Arduino shield or a Mini PCIe card was installed.
• The enclosure was physically modified, for example, openings were created to make
LEDs on a plug-in card in the device visible.
• Cables are routed from the inside out of the device or from the outside into the device,
for example, to connect sensors or displays.
The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
EU Declaration of Conformity
(https://support.industry.siemens.com/cs/ww/en/ps/16739/cert
).
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001.
This has been certified by the TÜV Rheinland.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
The following approvals are available for the device:
● Underwriters Laboratories (UL) in accordance with standard UL61010-2-201
(IND.CONT.EQ), File E472609
● Canadian National Standard CAN/CSA-C22.2 No. 142 and
CAN/CSA-C22.2 No. 61010-2-201
To Next Page
Loading...
Need help?
General
