02.96 Environmental compatibility
Siemens AG 6SE7087-6AC85-0AA0 ENGLISH
13-1
Common Rectifier Operating instructions
13 Environmental compatibility
Environmental aspects during development
The number of parts has been reduced substantially by the use of highly integrated components and by a
modular structure of the complete converter series. This reduces energy consumption during production.
Particular attention was paid to reducing volume, mass and type diversity of the metal and plastic parts.
Plastic parts used:
ABS: front cover
fan grille
PP: hinge
insulating plate
handle
bus retrofit
PA6: insulating films
terminal housing
On all essential parts, flame retardants containing halogen and insulating material containing silicone have been
substituted by materials that are devoid of noxious substances.
Environmental compatibility was an important criterion in the selection of externally sourced items.
Environmental aspects during production
Externally sourced items are mainly transported in returnable packaging. The packaging material itself is
recyclable, consisting mainly of cardboard.
With the exception of the hot galvanised side plate, surface coatings have been dispensed with.
Production is emission-free.
Environmental aspects of disposal
The unit can be dismantled into recyclable mechanical components by means of easily removable screw and
snap joints.
The pc boards can be disposed of thermally. The number of components containing hazardous substances is
only slight.
The plastic parts are marked in conformity with DIN 54840 and bear the recycling symbol.
To Next Page
Loading...
Need help?
General
