en Getting to know your appliance
34
Controls
By touching the fields, you can e.g.
select and start making a drink or adjust
the coffee strength.
Button Meaning
k
Switch the appliance on and off
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■ it is still warm when switched on, or
■ coffee was not dispensed before the appliance was switched off.
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 42
espresso Dispensing Espresso
caffe crema Dispensing Caffe crema
or display navigation “¾” (back without saving).
cappuccino Dispensing cappuccino
or display navigation “V” (navigate down).
latte macchiato Dispensing latte macchiato
or display navigation “ok” (confirm and save).
milk Frothing up milk
% Coffee strength
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 39
calc’nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc’nClean
service programme" on page 47
#
Make 2Espresso or 2Caffe crema at the same time. Position the cups next to one
another under the coffee dispenser.~ "Operating the appliance" on page 38
&
The fully automatic coffee machine has a cup warmer that can be switched on or off
manually with the button. When the cup warmer is on, the button lights up.
:Warning
Risk of burns!
The cup warmer becomes very hot!
Note: For optimal cup warming, place them with the base on the cup warmer.
To Next Page
Loading...
Need help?
General
