Operating the appliance en
39
The milk frother is installed.
1. Fill a large cup or a large glass with
approx. 100ml milk for cappuccino
and approx. 150ml milk for latte
macchiato.
2. Place a cup or a glass under the
outlet system.
3. Push the coffee dispenser and milk
frother right down.
4. Touch % repeatedly to select
the required coffee strength.
5. Touch the cappuccino or latte
macchiato button.
The milk is first frothed up in the cup or
glass. The coffee is then brewed and
dispensed into the cup or glass.
Note: To stop current dispensing of the
drink before the end, touch cappuccino
or latte macchiato again.
Frothing up milk
The appliance is switched on. The water
tank has been filled.
The milk frother is installed.
1. Fill a large cup or a large glass with
approx. 100ml milk.
2. Place a cup or a glass under the
outlet system.
3. Push the coffee dispenser and milk
frother right down.
4. Touch the milk button.
The milk is frothed up.
Note: To stop the process before the
end, touch milkagain.
Adjusting beverage settings
Ad j u s t i n g bever age set t i ngs
Preparing two cups at once
Before making a drink, you can select
dispensing of two cups at once.
Touching # switches the function on
or off.
"Double cup on" or "Double cup off"
lights up in the display for 5seconds.
The Double cup function is only
possible for espresso and caffe crema;
the buttons light up. Dispensing other
drinks is not possible while the Double
cup function is switched on.
Notes
■ The drinks are prepared in two steps
(two grinding operations). Please
wait until the process is fully
completed.
■ If no button is pressed within
90seconds, the appliance
automatically switches to the setting
"Double cup off".
Coffee strength
Before making a drink, you can adjust
the coffee strength:
To do so, touch % to select the
strength you require.
Note: The coffee strength selected is
then active for all drinks made with
coffee.
very mild
mild
regular
strong
very strong
only with TI305:
aromaIntense
To Next Page
Loading...
Need help?
General
