Siemens WM12US61ES User Manual

Buttons en
23
Buttons
7 Buttons
Buttons
The selection of programme settings depends on the programme that is set.
You can see the selection options for each programme in the overview for
→"Programmes", Page25.
Button Selection Description
inicio pausa +
carga (Start/Re-
load/Pause)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
varioSpeed ¡ Activate
¡ Deactivate
Activate or deactivate a short washing
programme.
Note:Energy consumption increases.
The washing result is not affected by
this.
i-Dos |
(Softener / Deter-
gent)
¡ Activate
¡ Deactivate
¡ Basic dosage
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener or liquid de-
tergent .
Press the button for approx. three
seconds to set the basic dosage.
→"Intelligent dosing system",
Page41
termin. (Ready
In)
1–24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note:Use the button to adjust the ba-
sic dosage.
→"Adjusting the basic dosage",
Page42
°C (Temperature) – 90 °C Adjust the temperature in °C.
(Spin) –––– - 1200 Adjust the spin speed or activate ––
–– (Rinse Hold).
If –––– is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
Note:Use the button to adjust the ba-
sic dosage.
→"Adjusting the basic dosage",
Page42

Siemens WM12US61ES Specifications

General

Brand	Siemens
Model	WM12US61ES
Category	Washer
Language	English