Siemens WM14Y890GB/30 User Manual

21
Ø End of programme by Rinse Hold
1. Select Spin (If required, adjust the spin speed) or Drain.
2. Select Start/Reload Ü.
End of the programme
Finished, remove washing is indicated on the display panel.
If Foam has been detected is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
Reduce basic dosage. ~ Page 36
Rinse hold reached:
Select "spin" or "drain"
and then "start".
Spin Drain
bb
v
Finished, remove washing

Siemens WM14Y890GB/30 Specifications

General

Brand	Siemens
Model	WM14Y890GB/30
Category	Washer
Language	English