Siemens WM14Y890GB/30 User Manual

69
Transportation, e.g. if moving house
Preparatory work
1. Turn off the tap.
2. Release the water pressure in the supply hose.
Maintenance – Filter in the water inlet hose ~ Page 47
3. Drain any residual detergent solution.
Maintenance – Drain pump blocked
4. Isolate the washing machine from the power supply.
5. Remove the hoses.
6. Drain dispensers. ~ Page 43
Installing transportation protection devices
1. Remove covers and keep in a safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
– Always remove the transportation protection devices!
~ Page 59
– To prevent unused detergent from flowing into the outlet
during the next wash cycle: Pour 1 litre of water into
dispenser
ÀÁ and start the Drain programme.

Siemens WM14Y890GB/30 Specifications

General

Brand	Siemens
Model	WM14Y890GB/30
Category	Washer
Language	English