Silvercrest SBB 850 F2 User Manual

■ 10
│
GB
│
IE
│
NI
SBB 850 F2
4) Use the arrow buttons D to adjust the length of
the selected programme phase to your require-
ments (for the possible setting range, see the
section "Programme sequence").
5) Press the bread weight F button again to
switch to the next programme phase.
6) When you have set all the required programme
phases, press the Start/Stop button B to save
the settings and exit the settings menu of this
programme memory location.
7) If you want to set another individual programme,
select another programme memory location
with the browning level C button and continue
as described above.
8) To start an individual programme, select it with
the browning level C button as required and
press the Start/Stop button B.
NOTE
► The settings remain stored until they are reset
using the reset function.
► To reset the times to the default settings, select
the corresponding individual programme
using the browning level C button and then
press the programme selector G and the
bread weight F buttons simultaneously.
Pausing or stopping the
programme
■ To interrupt the programme, briefly press the
Start/Stop button B; the time indicator b will
flash on the display A. Press the Start/Stop
button B again to resume the programme.
Otherwise, the programme will resume automat-
ically after 10 minutes.
■ If the programme ends automatically, you will
hear several beeps and the time indicator b
will display 0:00. The appliance will switch to
warming mode for 60 minutes.
NOTE
► At the end of programmes 9–14, there is
no warming mode.
► Remove the bread from the appliance at
the end of the warming mode (at the latest);
otherwise, it could become soggy.
■ To end the programme or warming mode pre-
maturely, press and hold down the Start/Stop
button B until you hear a long beep.
Taking out the bread
WARNING! RISK OF INJURY!
► The baking tin 8 can become very hot during
operation. Use pot holders or protective
gloves. There is a risk of burns!
CAUTION – PROPERTY DAMAGE!
► Do not use any metal objects to remove the
bread from the baking tin 8. They can cause
scratches on the non-stick coating.
NOTE
► Bread is usually easier to remove if you leave
it in the baking tin 8 for at least 30 minutes
after baking. You can use the warming mode
for this purpose.
1) Allow the baking tin 8 and the bread to cool
down sufficiently or use pot holders or oven
mittens.
2) Hold the baking tin 8 diagonally upside down
over a grill tray and shake it gently until the
bread slides out.
NOTE
► If you have not previously removed the
kneading blades 7 and the bread does not
come off them, remove them carefully with the
kneading blade remover q provided.
IB_360597_SBB850F2_LB6GB.indb 10 30.12.2020 15:49:23

Silvercrest SBB 850 F2 Specifications

General

Brand	Silvercrest
Model	SBB 850 F2
Category	Bread Maker
Language	English