11SKR 800 A1
GB
IE
To switch the alarm function on or off
Requirement: The device is in clock/standby mode.
♦ Press the
button briefly. The icon for the activated alarm function appears
on the display.
♦ Press the
button again briefly. The icon for the activated alarm function is
switched off.
NOTE
► The alarm time can only be changed if the menu "Set clock" is executed (see section
Setting the time, alarm time and alarm type).
Switching off the alarm
♦ While the alarm is sounding, press the button
3
to switch off the alarm for
24 hours.
If the alarm is not manually deactivated, the device will switch off the alarm automatically
after 1 hour.
Switching radio mode on/off
NOTE
► The technical features of this device enable an adjustable reception capability that
exceeds the permitted FM frequency range of 87.5–108MHz. In some countries,
different national regulations may apply to the assigned radio frequency ranges.
Please note that information received outside of the assigned radio frequency ranges
may not be exploited, passed on to third parties or otherwise misused.
♦ Press the
button to switch the radio on.
♦ Press the
button again to switch the radio off and thus put the device into clock/
standby mode.
NOTE
► The display illumination is switched off between 11 pm and 5 am in the clock/
standby mode. This switch-off time is permanently programmed and cannot be
changed.
♦ Press the
or button to switch on the display illumination for a short time.
To Next Page
Loading...
Need help?
General
