Silvercrest SMW 900 EDS B4 User Manual

SMW 900 EDS B4
■ 40
│
GB
│
IE
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
There is nothing on the
display 1.
The plug is not inserted into
a mains power socket.
Check the plug.
The mains power socket is
defective.
Try another mains power
socket.
The display 1 is defective.
Contact Customer Service.
The appliance does not
respond to pressing the
buttons.
The child safety lock is
activated.
Deactivate the child safety
lock (see section "Opera-
tion").
The appliance does not
start the cooking/heating
process.
The door is not properly
closed.
Close the door properly.
The turntable 3 makes a
loud noise when turning.
The turntable 3 is not cor-
rectly positioned on the axle.
Insert the turntable 3 cor-
rectly into the cooking area.
The small rollers 4 and/or
the fl oor of the cooking area
are unclean.
Clean the rollers 4 and the
fl oor of the cooking area.
"E01" appears on the
display 1 and you hear
beeps.
The microwave has over-
heated.
Terminate the current pro-
gramme immediately.
Remove the plug from the
mains power socket, open
the microwave door and
allow the appliance to cool
down.
"E02" appears on the
display 1 and you hear
beeps.
There is a sensor error.
Stop the programme and let
the appliance cool down.
Then restart the microwave.
If the error occurs again,
contact Customer Support.
There is an error during the
heating up of the appliance.
Stop the programme and let
the appliance cool down.
Then restart the microwave.
If the error occurs again,
contact Customer Support.
IB_275170_SMW900EDSB4_NL_BE.indb 40 02.05.16 10:16

Silvercrest SMW 900 EDS B4 Specifications

General

Brand	Silvercrest
Model	SMW 900 EDS B4
Category	Microwave Oven
Language	English