GB
│
MT
│
65 ■
SVEB 160 B2
5) Press the button o. The control lamps o/a light up and the appliance
sucks the air out of the container. As soon as all the air is sucked out, the
control lamps o/a switch off.
6) You can now remove the adapter d/f/g from the container and the
appliance.
Marinate function
You can use the marinate function if you want to marinate food such as meat.
The alternating vacuuming and pausing/aerating allows the marinade to pen-
etrate the pores much more quickly and the marinating process is accelerated.
The process takes around 15 minutes. You will need a suitable vacuum container
(e.g. from FoodSaver*) specially designed for marinating. They are character-
ised by a special valve that makes ventilation possible between the vacuuming
phases.
1) Connect the vacuum hose s onto the suction fitting
2 of the appliance.
2) If necessary for the container being used, connect the adapter g to the
vacuum hose s.
3) Close the appliance lid 1. Ensure that both corners of the appliance lid 1
click into place. If necessary, press them down once again on the markings
and so that the appliance lid 1 clicks into place and locks shut.
4) Connect the adapter g or, if no adapter is required, the black coupling
piece on the vacuum hose s to the appropriate fitting on the container.
Please refer to the instruction manual of the container for further information.
5) Press the
button p. The control lamps o/a light up and the appliance
starts the marinating programme with vacuuming. The appliance now alternates
between vacuuming (control lamp p lights up) and ventilating (control lamp
p flashes) for approx. 15 minutes.
Once the programme is finished, the control lamps p/a switch off.
6) You can now remove the adapter g/the vacuum hose s from the container
and the appliance.
*FoodSaver is a registered trademark of Sunbeam Products, Inc.
IB_367892_SVEB160B2_LB5.indb 65 30.06.2021 15:44:16
To Next Page
Loading...
Need help?
General
