Silvercrest SWE 100 A1 User Manual

Multi-Band Tuner SWE 100 A1
English - 15
polarity (+ and -). The correct polarity is labelled on the batteries
and beside the battery compartment. Close the battery
compartment cover and slide it in the opposite direction of the
arrow.
The device features a battery level indicator [15]. If it lights
yellow, the batteries are empty. When this happens, replace the
batteries with new batteries of the same type.
Remove batteries when the device is not to be
used for a long time.
Connecting a Plug-Type Power Adapter
Remove the batteries from the battery compartment [8] located
on the back panel of the device if any are inserted. Plug the
power adapter plug into the receptacle [19] of the multi-band
tuner. Plug the power adapter into an easily accessible wall
outlet.
Powering the Device On/Off
To power the device on, press the On/Off button [7] once. When
powered on, the device will display the currently tuned-in
frequency and the frequency band (FM, MW, SW).

Silvercrest SWE 100 A1 Specifications

General

Brand	Silvercrest
Model	SWE 100 A1
Category	Radio
Language	English