adjusting selectors for your fabric
ADJUSTING STITCH LENGTH
The stitch length dial regulates the length
of stitches. The numbers on the dial ex
press stitch length in mm; the higher the
number the longer the stitch. Generally,
shorter stitches are best for lightweight
fabric; longer ones for heavy fabric. The
0—1 area is used for the adjustment of
zigzag satin stitching.
Setting the Selector
• Turn dial so that the stitch length
desired is positioned under the ▼
symbol on the control panel.
• To shorten the stitch length, turn the
dial clockwise to a lower number.
• To lengthen the stitch, turn the dial
counterclockwise to a higher number.
For reverse stitching, press the reverse-
stitch push button (located in the center
of the dial) In as far as It will go and hold
in place (the button can be pushed in
while the machine is sewing). Release
pressure on the push button to return to
iforward stitching.
Reverse-
Stitch
Push
Button
(For detailed instructions on adjusting
the stitch length for zig-zag satin stitching,
see page 24 )
Reverse Stitching
17
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
Need help?
General
