cleaning the machine
Your machine will serve you perfectly for many years if you take a few
moments of your time to keep it clean. How often you will need to clean the
machine will depend on how often you use it.
WARNING:
Before cleaning your machine^ disconnect power-
-line plug from electrical supply.
Clean between
tension discs
Clean
y
Remove lint frdm exposed parts.
With a soft cloth, clean:
• Tension discs, take-up lever, and
thread guides.
• Presser bar and needle bar.
• Bobbin case. (If there is an excessive
amount of lint in the area, remove the
bobbin case for cleaning. See page 45
for instructions.)
• Machine surface. (If necessary, dahnpen
thecloth and use a mild soap.)
Remove face plate as instructed on page
45 and clean area behind it with a lint
brush.*
Remove needle plate as instructed on
page 7 and, using a brush, clean the
rotating hook area under the needle plate
and slide plate.
NOTE: Your machine requires oiling at
only one point under normal condi
tions.
* Brush not
included
with
machine
accessories.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
Need help?
General
