37
BUTTON SEWING
2.5~4.5
Select the pattern 25 from the Group
Patterns "A" to get the button sewing stitch.
Change the presser foot to the button
sewing foot.
Move the drop feed lever to " " to lower
the feed dogs.
For buttons with 4 holes, sew through the
front two holes first, push work forward and
then sew through the back two holes.
Position the work under the foot. Place the
button in the desired position, lower the foot.
Adjust the stitch width to " 2.5-4.5 "
according to the distance between the two
holes of the button.
Turn the handwheel to check that the needle
goes cleanly into the left and right holes of
the button.
Before sewing, press the Auto-lock button to
sew reinforcement stitches automatically at
the beginning and at the end of the stitch.
If a shank is required, place a darning
needle on top of the button and sew.
2.5~4.5
5
6
22 4
3
1
2
6
4
5
3
1
To Next Page
Loading...
Need help?
General
