GB
Free motion darning, stippling
* The darning foot is an optional accessory not included with
your machine. (1)
Install the darning plate. (2)
For darning, first sew around the edge of the hole (to secure
the threads). (5)
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Stippling:
Sew a straight stitch. Using the optional darning foot will help
guide you as you sew, in a meandering fashion to create
small curving lines to hold layers of fabric and batting
together.
Set the machine as illustrated.
Darning:
Remove the presser foot shank. (3)
Attach the darning foot to the presser foot holder. The lever
(a) should be behind the needle clamp screw (b). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (c). (4)
First row: Always work from left to right. Turn work by 90°
and sew over previous stitching. A darning hoop is
recommended for easier sewing and better results.
Note:
52
1 2
3
a
b
c
5
4
To Next Page
Loading...
Need help?
General
