28
BOBBIN THREAD TENSION REQUIRES ADJUSTMENT
LESS FREQUENTLY THAN THE TOP THREAD TENSION.
If the tension is well balanced, but the fabric puckers badly,
both top and bobbin thread tensions may be too tight and
have to be adjusted. To test if the bobbin thread tension is
correct, suspend the bobbin case by the thread and jerk
it once. Correct bobbin tension will result in the thread
unwinding only one or two inches. If too loose it will unwind
continuously. If too tight the thread will not unwind at all.
When adjusting the tension on the bobbin case, make only
slight adjustments with a screwdriver.
Fabric puckers
ȀȘȎțȪȚȜȞȧȖȠȟȭ
.XPDúE]O\RU
ADJUSTING BOBBIN THREAD TENSION
Increase
ȁȐȓșȖȥȪȠȓ
$UWÕUPD
Decrease
ȁȚȓțȪȦȖȠȓ
$]DOWPD
ǻǮȀȍǴdzǻǶdzǻǶǴǻdzǷǻǶȀǶ
0$685$ø3/ø.7$16ø<218181
$<$5/$10$6,
ǻǮȀȍǴdzǻǶdzǻǶǴǻdzǷǻǶȀǶȀǾdzǯȁdzȀǾdzDZȁǹǶǾǼǰǸǶǾdzǴdz
ȅdzǺǻǮȀȍǴdzǻǶdzǰdzǾȃǻdzǷǻǶȀǶ
dzȟșȖțȎȠȭȔȓțȖȓțȖȠȓȗȣȜȞȜȦȜȟȏȎșȎțȟȖȞȜȐȎțȜțȜ
ȝȞȖȫȠȜȚȠȘȎțȪȟȖșȪțȜȚȜȞȧȖȠȟȭȫȠȜȚȜȔȓȠȏȩȠȪ
ȝȞȖȕțȎȘȜȚȟșȖȦȘȜȚȏȜșȪȦȜȑȜțȎȠȭȔȓțȖȭȘȎȘȐȓȞȣțȓȗ
ȠȎȘȖțȖȔțȓȗțȖȠȓȗȅȠȜȏȩȝȞȜȐȓȞȖȠȪȝȞȎȐȖșȪțȜȟȠȪ
țȎȠȭȔȓțȖȭțȖȔțȓȗțȖȠȖȝȜȒȐȓȟȪȠȓȦȝȡșȪțȩȗ
ȘȜșȝȎȥȜȘȕȎțȖȠȘȡȖȞȓȕȘȜȒȓȞțȖȠȓǽȞȖȝȞȎȐȖșȪțȜȚ
țȎȠȭȔȓțȖȖțȖȠȪȞȎȕȚȜȠȎȓȠȟȭȠȜșȪȘȜțȎțȓȟȘȜșȪȘȜ
ȚȖșșȖȚȓȠȞȜȐǽȞȖțȓȒȜȟȠȎȠȜȥțȜȚțȎȠȭȔȓțȖȖȜțȎ
ȏȡȒȓȠȞȎȕȚȎȠȩȐȎȠȪȟȭțȓȝȞȓȞȩȐțȜǽȞȖȟșȖȦȘȜȚ
ȟȖșȪțȜȚțȎȠȭȔȓțȖȖțȖȠȪȟȜȐȟȓȚțȓȞȎȕȚȜȠȎȓȠȟȭ
DzșȭȞȓȑȡșȖȞȜȐȘȖțȎȠȭȔȓțȖȭțȖȔțȓȗțȖȠȖȒȜȟȠȎȠȜȥțȜ
țȓȚțȜȑȜȝȜȐȓȞțȡȠȪȐȖțȠțȎȣȜȒȭȧȖȗȟȭțȎȦȝȡșȪțȜȚ
ȘȜșȝȎȥȘȓȟȝȜȚȜȧȪȬȜȠȐȓȞȠȘȖ
0$685$ø3/øöø7$16ø<218h67ø3/ø.7$16ø<2181'$1
'$+$$=6,./,.7$$<$5/$0$*(5(.7ø5ø5
7DQVL\RQGHQJHOLDQFDNNXPDúWDE]OPHROX\RUVDKHPVWKHP
GHPDVXUDLSOL÷LWDQVL\RQODUÕoRN\NVHNRODELOLUYHD\DUODQPDODUÕ
JHUHNLU
0DVXUDLSOL÷LQLQWDQVL\RQXQXQGR÷UXROGX÷XQXWHVWHWPHNLoLQ
PDVXUD\ÕLSOL÷LQGHQDVÕOÕWXWXQYHELUNH]VDOOD\ÕQ'R÷UXPDVXUD
WDQVL\RQXLSOL÷LQoRND]PLNWDUGD o|]OPHVL\OHVRQXoODQDFDNWÕU
øSOLNoRNJHYúHNLVHVUHNOLo|]OHFHNWLUøSOLNoRNVÕNÕLVHKLo
o|]OPH\HFHNWLU
7DQVL\RQXPHNLN]HULQGHD\DUODUNHQELUWRUQDYLGDLOHVDGHFH
NoND\DUODPDODU\DSÕQ
To Next Page
Loading...
Need help?
General
